Open Pilot Cc3d Software 14
Mavlink. This is a standard used for Arduino based autopilots. Mavlink is the de facto standard for autopilots in general. Ardupilot, DRONESimulator, MAVlink and gimbals all come with Mavlink firmware preinstalled. Some like Ardupilot and ArduRover require additional downloads from the AR.Drone.org website.
DroneKit is an open source community based autopilot firmware library. Its aims are to provide high performance, low latency, reconfigurable, and secure autopilots for multicopters. The library is developed with cross-compilers, so users can use it on any board. The software currently supports multirotors and helicopters, and has diverse features, such as takeoff/landing mode, robust attitude estimation, obstacle avoidance, and perimeter following.
Avrdude. This is one of the most popular software to program your flight controller via a PC. You can easily change the PPM rate, configure the gain of all the flight controller channels, and even flash, program, erase and upload your firmware using a simple tool.
Arducopter is a mobile drone simulation for Android, iOS, Windows, Linux, macOS, and OSX. It includes multiple flight modes, full 3D navigation, onboard FPV camera, position and velocity tracking, IRC chat, Waypoints and much more. It can be used with a variety of different autopilots, and with some of them, can be used with software/gimbal combo.
This is a project that was started by the Roboteer team to re-write the external UAV Linux driver for their internal ESC/motor controller boards. The work is maintained by the x-bar team with the goal of providing an open source UAV linux driver for the Galileo Gen2 board.
the skyfpv project produces fpv cameras and enables you to see what your drone is seeing. the cc3d board is based on the ti msp430 which has very low power consumption. the skyfpv has an open source firmware that can be modified by anyone who wants to.
the x-plane project is an open source flight simulator software. you can fly the plane in 3d. you can fly over a city, or over farmland. you can even fly over a desert landscape. the flight model is very similar to the real world. i can’t remember how i found out about this, but it is a very popular project. there is a community forum where you can ask questions and get help from the community.
the mgc-800 is a raspberry pi flight controller from a company called maxon. it is fairly new, but is a very good alternative to the cc3d. the controls are the same as the cc3d, and the software is based on openpilot.
the cc3d is a flight controller designed by the company dave which is in the uk. the cc3d firmware is based on openpilot. the hardware is not supported by the openpilot developers, and so it is left to dave to support the hardware.
the cc3d is a flight controller from a company called dave which is in the uk. the cc3d firmware is based on openpilot. the hardware is not supported by the openpilot developers, and so it is left to dave to support the hardware.
tau labs also makes a very good open source autopilot software for fixed wing aircraft. it is also very well supported with many users using it in their projects. the software is made to be a very robust and stable system and is used to great effect in the drone racing world.